Author Topic: Fairing Wrap/Protection  (Read 1707 times)

MW

  • Jr. Member
  • **
  • Posts: 96
  • Honda Africa Twin 2017
Fairing Wrap/Protection
« on: March 20, 2016, 09:55:01 PM »
Hi All...has anyone got any contacts or can suggest a clear protective film to cover the side fairing of my tank. On the new VFR1200 the tank is pretty small but on both sides is a plastic panel, its getting pretty scuffed and I want some kind of protection on it... Any Ideas ?
Thanks
Mark

Forum Manager

  • Administrator
  • Sr. Member
  • *****
  • Posts: 397
Re: Fairing Wrap/Protection
« Reply #1 on: March 20, 2016, 10:00:59 PM »
Hi Mark

Stuart Turner is your man or knows a man he has had his bike and car done swears by it.

Andy

MW

  • Jr. Member
  • **
  • Posts: 96
  • Honda Africa Twin 2017
Re: Fairing Wrap/Protection
« Reply #2 on: March 20, 2016, 10:06:29 PM »
Fab Andy, Ill give him a bell in the week.
Thanks

MART DORAN

  • Committee
  • Full Member
  • *****
  • Posts: 131
Re: Fairing Wrap/Protection
« Reply #3 on: March 21, 2016, 08:41:33 AM »
There you go......

http://www.3mventureshield.co.uk

Got it on the Blade, brought the kit, easy to install.

M
If it's a 4, make sure it's a  V4.....8)

michaelbryant

  • Newbie
  • *
  • Posts: 47
Re: Fairing Wrap/Protection
« Reply #4 on: March 21, 2016, 03:03:12 PM »
Or fit a Baglux tank cover?

nigel smith

  • Newbie
  • *
  • Posts: 13
  • z1000sx
Re: Fairing Wrap/Protection
« Reply #5 on: March 21, 2016, 03:16:09 PM »
Hi,

just phoned the local dealer for Birmingham which is in Daventry.

the DIY kit is around 90 for it to be fitted add 110. (200 in total)

http://www.3mventureshield.co.uk/find-installer/bodyguard-uk/

MW

  • Jr. Member
  • **
  • Posts: 96
  • Honda Africa Twin 2017
Re: Fairing Wrap/Protection
« Reply #6 on: March 21, 2016, 06:01:22 PM »
Cheers All.. Looked at the 3M kit as suggested, looks easy to fit.
40 for tank, not a bad price..
Thanks again

Phil_W

  • Jr. Member
  • **
  • Posts: 57
Re: Fairing Wrap/Protection
« Reply #7 on: March 21, 2016, 09:25:57 PM »
Hi Gents, if you want wrapping done, back in March ( I think it was), I had my then new Matt Black Triumph 675 wrapped.
It was done by a local chap recommended to me by a Race Team I used to work for. His name is

Tony James Design. Number 07718 000561.

He will do it at your premises and carries a vinyl cutter in his van, cuts the panels and fits them there and then. He is a total perfectionist and won't except anything but perfect, and only uses the best materials.

I know this sounds like an advert and I'm not on commission honestly. I just used him and was very impressed ( as you can tell). He is only local, I think he lives on Cheswick Green Solihull.

Well worth a call, myself and Cus were going to get him round to do our bikes.

Cheers
Phil.
The Future's Bright, the Future's ORANGE !!

Stuart Turner

  • Newbie
  • *
  • Posts: 2
Re: Fairing Wrap/Protection
« Reply #8 on: March 22, 2016, 09:15:22 PM »
Mark, I've just seen this post

It's Tony James Design I use
As just mentioned in the previous post by Phil.
He does a fantastic Job
Get him to fit it

Regards

Stuart

blackb15

  • Newbie
  • *
  • Posts: 9
Re: Fairing Wrap/Protection
« Reply #9 on: April 20, 2017, 09:32:04 AM »
I use venture shield on all the bikes I've owned over the last 10 years it's great just had my new ktm1290 s done used bodyguard at daventry very good again.
Safe riding
Paul
I spent most of my money on fast bikes,beer and women the rest I just wasted !